The TRISA command line client is a utility that assists TRISA integrators and developers testing their TRISA service. Advanced users may also use the TRISA client to execute TRISA requests for compliance purposes, although this is not recommended for extensive use. To install the latest version of the TRISA CLI, you must have Go installed on your computer. The following command will install the latest version of the CLI:

$ go install

We are currently working on a release mechanism that will automatically build the CLI for a variety of platforms so that in the future you will not need to have Go installed. Stay tuned!


Before you can start using the TRISA CLI, you must first configure your environment to ensure that you can successfully connect to a remote peer or the directory service.


  1. The trisa command installed and on your $PATH
  2. Your testnet certificates that include both the trust chain and private key.

The TRISA CLI command is configured via flags specified for each command or by setting environment variables in your shell with the configuration. The CLI also supports the use of .env files in the current working directory for configuration. To see what CLI flags should be specified use trisa --help. An example .env configuration file is as follows:

# The endpoint to the TRISA node that you'd like to connect to. The endpoint can be
# found using the directory service lookup command.

# Directory service you'd like to connect to. You can specify a short name such as
# "testnet" or "mainnet" or the endpoint of the directory service to connect to. The
# configured directory is by default.

# Path to your TRISA identity certificates that include the private key. This can be the
# original .zip file sent by Sectigo or the unzipped .p12 file; in which case the
# PKCS12 password must also be supplied. If you've decrypted it manually it should be in
# PEM encoded format with the .pem or .crt extension.

# If you've split your certs into the public trust chain without private keys and a
# private key file, then specify the path to the trust chain (optional).

# If the certs are PKCS12 encrypted then specify the password for decryption (optional).

The simplest way to get started with TRISA is to copy and paste the above snippet into a .env file in your current directory, then modifying the values as necessary.

Creating Secure Envelopes

The first step when using the TRISA CLI is to create some payload data that can be sealed inside of secure envelopes for TRISA envelopes. At a minimum, there are two JSON files that you need to create or provide for the payload:

  1. An identity payload containing IVMS 101 data.
  2. A transaction payload containing a Transaction or Pending message.

The identity payload is the compliance information required for the transfer and the transaction payload is used to identify the transaction on the chain and associate it with the identity information. For ease of data entry, these files may be specified as JSON files and the protocol buffer payload created using the trisa make command.

$ trisa make -i identity.json -t transaction.json -o envelope.json

With no other arguments, this command creates an unsealed envelope that has a random envelope ID, the current time as the sent at timestamp, and no received at timestamp in the payload. The documentation refers to this kind of secure envelope as a “payload template” in the rest of the documentation because it can be loaded by the trisa seal or trisa transfer commands to update the envelope ID, timestamps, before sealing the envelope with the public keys of the recipient.

To create a complete envelope or a fully sealed envelope, simply specify the public sealing key with the -seal flag as well as any additional metadata you’d like to supply on the envelope such as the envelope ID (see trisa make --help for more details).


To seal an envelope you must have the public keys of the recipient, see the key exchanges section for more detail on how to retrieve the public sealing key of a remote peer. Once you’ve exchanged keys and saved them to disk, you can seal an unsealed envelope with the following command:

$ trisa seal -in unsealed_envelope.json -out sealed_evelope.json -seal public.pem

Once the envelope has been sealed, only the recipient with the private key counterpart to the public key used to seal the envelope can open the secure envelope.

While sealing the envelope you also have the opportunity to update the envelope, e.g. to mark the received at timestamp or set a different envelope ID to create a new transfer:

$ trisa seal -in envelope.json -out sealed.json -seal public.pem -received-at now

Another common workflow is to generate an error envelope with the same ID as an incoming envelope. Error envelopes do not require any cryptography, so the public key is not required:

$ trisa seal -in envelope.json -error-code COMPLIANCE_CHECK_FAIL -error-message "sanctioned entity"


By default the trisa open command is used to unseal an envelope and save it as an unsealed envelope for further processing. This command can also be used to extract the payload or check if an incoming envelope has an error on it. To extract an unsealed envelope and save it to disk:

$ trisa open -in envelope.json -out unsealed_envelope.json -key private.pem

If you add the -payload flag, then the payload will be decrypted and saved to disk; adding the -error flag will extract an error and save it to disk. If the envelope.json is an unsealed envelope, then the -key flag can be omitted. If the -out flag is ommitted, the contents will be printed to disk. For example to simply view the payload of a sealed envelope:

$ trisa open -in envelope.json -key private.pem -payload

Or to view an error on the envelope:

$ trisa open -in envelope.json -error

Note that no private key is required for errors since errors are not encrypted.


By default a key exchange will use your TRISA identity certs as the sealing key, however the trisa open command won’t automatically use your TRISA identity certs for unsealing the envelope. If you used the default key exchange then you can take advantage of the environment configuration to pass the path to your identity certs that contain your private key as follows:

$ trisa open -in envelope.json -key $TRISA_CERTS

Interacting with TRISA Peers

The primary use of the trisa CLI is to execute TRISA RPC requests to a TRISA node. A general workflow is as follows:

  1. Identify the peer endpoint using the Directory Service lookup or search functionality.
  2. Create a secure envelope or payload template to prepare to send to the remote peer.
  3. Perform a key exchange with the remote peer and save the sealing keys.
  4. Seal the secure envelope or payload template with the remote peer’s sealing keys.
  5. Execute a transfer and save the response envelope.

This workflow generally mirrors the workflow of live TRISA compliance operations, though many of the steps are manual to facilitate integration and development.


Send a secure envelope to the remote TRISA peer and receive a secure envelope in exchange. Transfers are the central compliance exchange mechanism in the TRISA protocol. If you have already created and sealed an envelope, saving it to outgoing.json you can transfer it as follows:

$ trisa transfer -i outgoing.json -o response.json

This will execute the TRISA transfer and save the response, including TRISA error envelopes, to disk at the specified path. If the extension of the output path is .json then the envelope is marshaled to .json format, if it is the .pb extension it will be saved as a raw protocol buffer. If the -o flag is not supplied, then the JSON response will be printed to the command line. If you would like the decrypted payload printed, then you must provide the private sealing key:

$ trisa transfer -i outgoing.json -k private.pem

If both an output path and the private key are provided then a JSON file is produced with the unsealed envelope that can be read using the open command or resent using the seal command.

You can also use a secure envelope payload template to seal and transfer an envelope in one step instead of using the intermediate seal command:

$ trisa transfer -i outgoing.json -s public_sealing_key.pem

See sealing secure envelopes for more information on the command line arguments that can be used to adapt secure envelopes before sending them.

If you would like to send an error-only secure envelope to the recipient, then you must supply the envelope ID, error code, and error message as follows:

$ trisa transfer -I envelope-id-foo -C COMPLIANCE_CHECK_FAIL -E "something went wrong"

Note that sending an error-only secure envelope is usually a response to an incoming message. This mechanism is used primarily to test a server’s handling of an asynchronous transfer workflow.


The TRISA CLI command currently does not implement the TRISANetwork/TransferStream birdirectional streaming RPC and does not have plans to implement this in the CLI. If you would like an implementation of streaming from the command line, please open an issue on our GitHub repository.

Key Exchanges

Send a key exchange request to get the public sealing key of the node. Key management is a somewhat complex topic, and the TRISA CLI attempts to do the simplest possible thing to enable testing and development. A key exchange requires you to send your public sealing keys to the remote node, and they will return keys to you. Prior to a transfer, a key exchange must be completed so that you have the sealing keys to create a secure envelope and so that the remote has your public keys to send a response.

By default, the TRISA CLI will simply use your TRISA mTLS identity certificates as the keys for a key exchange. The simplest exchange is therefore:

$ trisa exchange -o peer_sealing_keys.pem

The -o flag saves the keys to disk at the specified path, so that you can use the keys later on to make secure envelopes or conduct transfers. If the -o flag is ommitted, the JSON data of the response, an SigningKey protocol buffer message will be printed to stdout. There are several formats that the keys can be saved in: a path with a .json or .pb extension will save the protocol buffer message to disk in the specified format; a path with a .pem or .crt extension will save the keys as PEM encoded public key.

To send alternative keys to the remote peer in a key exchange, you may use the -i flag to specify the path of keys to send. If the input path ends in .json or .pb it is parsed as a SigningKey protocol buffer message in JSON format or raw protobuf format respectively. If the input path ends in .pem or .crt it is parsed as a PEM encoded public key or x.509 certificate. Note that the PEM encoded format, the first PUBLIC KEY or CERTIFICATE block that is found is used for parsing.

To generate your own RSA keys to send to the remote server for key exchange, use the following commands:

$ openssl genrsa -out private.pem 4096
$ openssl rsa -in private.pem -pubout -out public.pem

This will create two files, private.pem that contains your private keys and public.pem which contains your public keys. Send the public key to the remote TRISA peer as follows:

$ trisa exchange -i public.pem -o peer_sealing_keys.pem

Ensure that you keep the private.pem file so that you can decrypt transfers that follow; it is likely that the remote TRISA node will use the key you just exchanged in sending outgoing transfers and preparing responses to your transfers. The only way to decrypt that data is with the private key!

Address Confirmation


Address confirmation has not yet been fully defined by the TRISA working group. The TRISA technical subcommittee is currently working on the Address Confirmation protocol, so stay tuned for more information!

Health Checks

Send a health check request to check the status of the TRISA node.

The health check RPC is primariliy for the directory service to monitor if the TRISA network is online, however it is also useful for debugging or diagnosing connection issues (e.g. is the remote peer offline or are my certificates invalid). A simple health check request is as follows:

$ trisa status

Use the --insecure flag to connect without mTLS credentials, though not all TRISA peers will support an insecure status check.

Interacting with the GDS

The TRISA CLI supports some basic interactions with the TRISA Global Directory Service (GDS) based on your initial configuration.


Lookup a TRISA VASP by common name or VASP ID. The following requests will lookup Alice on the TestNet by both common name and ID:

$ trisa lookup -n
$ trisa lookup -i 7a96ca2c-2818-4106-932e-1bcfd743b04c

Lookups also support the registered directory argument if looking up a VASP that is a member of the network but was issued certificates from a different directory service. If omitted, by default the directory service will lookup the VASP record as though it was the registered directory.

Search for a TRISA VASP by name or by website. You can specify multiple names and websites to expand your search. E.g. to search for “Alice” and “Bob” on the TestNet:

$ trisa search -n alice -n bob

If this returns too many results you may specify either category or country filters for the results. Country filters are inclusive and should be ISO Alpha-2 country codes:

$ trisa search -n alice -n bob -c US -c SG

Categories are case sensitive and websites must be full URLs for the search to work. If you’re not getting any results for a website search, try adding the http:// prefix or removing any paths from the URL. If you’re not getting any results for the name, try using a prefix of the name that is greater than 3 characters.

Categories that may be helpful in filtering:

VASP CategoriesBusiness Categories

Guided Walkthrough

This section contains a guided walkthrough of an interaction with the Alice rVASP using the CLI. To complete this walkthrough you will need TRISA TestNet certificates issued by the TRISA Global Directory Service, the trisa CLI application installed and configured with those certs as discussed at the top of this guide. Ensure that the $TRISA_DIRECTORY environment variable is set to testnet.

First, perform a TRISA Global Directory search for the Alice VASP:

$ trisa search -n alice
  "error":  null,
  "results":  [
      "id":  "7a96ca2c-2818-4106-932e-1bcfd743b04c",
      "registered_directory":  "",
      "common_name":  "",
      "endpoint":  ""

To get more information about Alice VASP, lookup the record in the GDS:

$ trisa lookup -cn
    "name":  "AliceCoin",
    "country":  "US",

The rest of the interactions will be with the Alice rVASP, so ensure that the $TRISA_ENDPOINT environment variable is set to (or whatever endpoint was returned by the directory service).


Managing the environment variables for configuring the trisa CLI can be done with a .env file in your current working directory.

Download a copy of the following data for the payload:

This contains payload information as though we are sending Alice a compliance information transfer from a VASP named “MyVASP”.

Build the payload template:

$ trisa make -i identity.json -t transaction.json -o unsealed_envelope.json

This should create an unsealed envelope with the payload data, the sent at timestamp set to now and a random envelope ID. To view the payload in the unsealed envelope:

$ trisa open -i unsealed_envelope.json -payload

Conduct a key exchange with Alice to get Alice’s public keys to seal the envelope:

$ trisa exchange -o alice.pem

You can then seal the envelope so that only Alice can open it:

$ trisa seal -i unsealed_envelope.json -s alice.pem -o outgoing.json

You can now make the transfer to Alice:

$ trisa transfer -i outgoing.json -o incoming.json

View the payload from Alice using your private key to decrypt the message. Note that you’ll need to source the .env file for the following command to work if you’re using the .env file for configuration:

$ source .env
$ trisa open -i incoming.json -k $TRISA_CERTS -payload

If you receive the following error when running the above command:

envelope in unhandled state corrupted

It means that the rVASP is running an older TRISA version. Please contact the TRISA admins if this is the rVASP running in TestNet or use the latest docker image if you’re running an rVASP in your local environment.